Heavy-duty Power Pressure Cleaner built for Australian conditions and reliability are ideal for industrial use and supported by full servicing.
Choose from Electric, Petrol, Diesel, Hydraulic, and Trailer-Mounted models to suit your site requirements.
Tackle built-up grime, oil, and debris across workshops, yards, and fleet areas.
Built tough using high-grade components for long-term reliability in harsh conditions.
Designed to reduce consumption while maintaining maximum cleaning power.
Buying a power pressure cleaner for a worksite in Western Australia is not the same as grabbing a cheap unit off a shelf on the east coast. Red dust, bore water, remote sites and long supply lines punish light duty gear. If your machine fails in the Pilbara, you are not losing a Saturday afternoon. You are losing production hours. This guide explains what a power pressure cleaner actually does, how to pick the right one for WA conditions, and why local backup matters more than the sticker price. If you already know what you need, you can browse the SPITWATER power pressure cleaner range at OEM Group® or call our Perth team on +61 8 9270 0200 for a quote today.
A power pressure cleaner is a machine that pumps water at high pressure, measured in PSI or bar, through a lance and nozzle to strip dirt, grease, oil and grime from hard surfaces. The pump does the cutting and the flow rate, measured in litres per minute, does the flushing. Both numbers matter. A unit with high pressure but low flow will cut grime yet take all day to rinse a wash pad. A balanced machine finishes the job faster and uses less water, which counts in a state where water restrictions are a fact of life.
Power pressure cleaner units fall into a few practical groups. Cold water models handle mud, dust and general dirt on vehicles, plant and concrete. Hot water models heat the water on board, which cuts through grease and hydraulic oil far faster, the same way hot water cleans a greasy dinner plate better than cold. For workshops, wash bays, transport yards and mine sites, hot water is usually the smarter long term buy. Power source is the next decision. Mains powered units suit fixed wash bays with reliable supply. Engine driven units give you full independence on remote sites, stations and mine leases where power points do not exist. If you are unsure which setup fits your operation, the team at our cleaning equipment and servicing division can match a machine to your exact duty cycle.
Western Australia is hard on equipment. Here is what actually matters when you compare models. First, duty rating. A domestic unit rated for one hour a week will not survive daily use on a Karratha wash pad. Commercial and industrial power pressure cleaner models use slow revving pumps, brass or stainless heads and heavy frames built for continuous work. Second, serviceability. Every machine eventually needs seals, valves and nozzles. Ask where the nearest service agent is before you buy, not after the pump goes down. OEM Group® runs servicing and repair workshops in Hazelmere near Perth and in Gap Ridge, Karratha, so Pilbara operators are not freighting machines across the country for a seal kit.
Third, water quality. Bore water and recycled wash water carry minerals and grit that chew through cheap pumps. Industrial grade filtration and quality pump internals protect your investment. Fourth, chemicals. Pressure alone will not remove baked on hydrocarbons or mining residue. Pairing your machine with the right detergent, like the FlowRPM chemical solutions range, cuts cleaning time and improves results without damaging surfaces. Fifth, compliance. Mine sites and industrial clients expect equipment that meets site safety standards, with proper guarding, thermal protection and documentation. Ask your supplier to show you the paperwork.
One more option worth knowing about. If you have a short term shutdown, a one off project or you want to trial a machine before buying, OEM Group® offers power pressure cleaner equipment hire from its WA branches. Hiring first is a low risk way to confirm the pressure, flow and heat you really need.
Most sellers in this market are national retail chains. They will ship you a box. What happens after that is your problem. OEM Group® works differently. We are a Western Australian industrial supplier with more than two decades of experience, branches in Perth and Karratha, and clients that include BHP, Rio Tinto, Fortescue, Qantas and the Department of Defence. We supply SPITWATER machines, an Australian built brand trusted on mine sites across the country, and we back every unit with local technicians, genuine parts and scheduled servicing.
That means your power pressure cleaner is commissioned properly, your operators are shown how to run it, and when it needs maintenance a local technician turns up on time. One Pilbara client running four SPITWATER units on industrial wash pads told us they could not be happier with the prompt problem solving from our Karratha team. That is the difference between buying a product and buying a working outcome. We also offer flexible financing, custom trailer mounted configurations through our custom solutions team, and asset management for fleets. Ready to talk numbers? Request a quote through our contact page, call Perth on +61 8 9270 0200, or call the Pilbara branch on +61 8 9131 5007. Shop the range, hire a unit, or get a tailored recommendation today.
Stop guessing and start cleaning. Call OEM Group Perth on +61 8 9270 0200, call Karratha on +61 8 9131 5007, or request a quote online now. Buy outright, finance it, or hire first. Either way, you get WA based support that keeps your gear working.
Explore our full range of SPITWATER models—each purpose-built to suit different site needs, from enclosed workshops to remote mining camps.
Compact, low-maintenance, and ideal for indoor or power-accessible jobs. These units run quietly and produce no emissions—perfect for enclosed or noise-sensitive environments.
Mobile and powerful, petrol models are suited for remote or rugged sites. Easily mounted to utes or trailers and compatible with water tanks for off-grid use.
Heavy-duty and fuel-efficient, diesel models are built for continuous industrial use. Available in hot or cold water, with long runtimes and lower total cost of ownership.
Designed for hazardous or remote environments, these fume-free units connect to existing hydraulic systems. Ideal for drill rigs, marine work, dust suppression, and more.
Designed for hazardous or remote environments, these fume-free units connect to existing hydraulic systems. Ideal for drill rigs, marine work, dust suppression, and more.
Built and assembled in WA, these complete mobile units are ideal for plant washdowns, graffiti removal, and maintenance across mining, industrial, and council sites.
A powerful pressure cleaner earns its keep in the hardest settings. Our machines are used every day in mining, transport, agriculture, food processing, construction, and commercial cleaning. Major operators such as BHP, Rio Tinto, Fortescue, and Cleanaway run SPITWATER units on their sites, alongside plenty of smaller trades and family businesses. When gear has to perform in heat, dust, and long shifts, reliability is not a nice-to-have it is the whole point. A machine that breaks down mid-job costs you far more than it saved at the checkout.
A Power Pressure Cleaner works even harder with the right add-ons. Pair yours with FlowRPM chemical solutions to shift stubborn grease and grime faster and with less scrubbing. Add VACSTORM floor cleaners to dry and finish an area cleanly after a washdown, which matters a lot for safety in busy workshops. And if you need to move your gear around a site, a Power Pressure Cleaner turns any unit into a complete mobile wash station, built and assembled right here in WA. You can see how it all fits together on our cleaning equipment page, where the full lineup sits side by side.
Choosing the machine is only half the job. What happens after you buy matters just as much, and it is where OEM Group® stands apart from online-only sellers. You get real people, local service, and genuine parts — not a box on a doorstep and a phone number that goes nowhere
Ready to buy? Shop the full SPITWATER range and compare electric, petrol, diesel, and hydraulic models side by side. Not sure which one fits? Book a free demo and we will show you a unit in action before you commit a cent. Every machine is backed by genuine parts and honest advice, so you are never left guessing whether you picked the right one.
Ready to buy? Shop the full SPITWATER range and compare electric, petrol, diesel, and hydraulic models side by side. Not sure which one fits? Book a free demo and we will show you a unit in action before you commit a cent. Every machine is backed by genuine parts and honest advice, so you are never left guessing whether you picked the right one.
Machines work harder when they are looked after. Our WA-based technicians handle servicing and repairs for all major brands, either on your site or at our Perth workshop. Regular servicing keeps your pressure cleaner running at full power and helps it last for years instead of months. We keep genuine SPITWATER parts in stock, plus fittings to suit most other brands, so a common repair does not leave you waiting weeks for a part to ship in.
Only need a machine for a short job? Or want to stay productive while yours is in for repair? Our equipment hire options let you grab a unit when you need one, without the upfront cost of buying. Hiring is also a smart way to test a model on your own site before you commit to it, or to cover a busy period without adding gear you will not use later.
When you call OEM Group®, you talk to people who understand the machines and the work they do. We are based in Western Australia, with branches in Perth and the Pilbara, so help is close by when you need it. From picking the right unit to keeping it running for years, you get straight answers and quick support. That is the kind of backup you simply do not get from a faceless website.
STEPRITE® Safety Platform Ladders are engineered to meet Australian Standards and the real-world demands of mining, transport, and manufacturing. Designed to reduce fall hazards and improve site access, they deliver safety, strength, and compliance in one tough solution.
From fleet washdowns to on-site cleaning see how SPITWATER Power Pressure Cleaner perform across industries.
For light cleaning, cars, and general dirt, a mid-range unit is plenty. For heavy grease, machinery, and industrial build-up, look for strong pressure and flow together, and consider hot water. When in doubt, tell us the job and we will match the numbers to it.
Go electric for indoor and power-connected work, petrol for mobile and off-grid jobs, and diesel for heavy daily use where running cost matters. Hydraulic suits sites where fumes or engines are a problem.
Yes. Electric hot water units are a good fit because they run without exhaust fumes and keep noise low, which suits food processing and indoor spaces.
It depends on the hours you run it, but regular servicing pays for itself by preventing bigger faults and keeping the pump healthy. Our team can set up a simple schedule that suits how hard you work the unit.
Hear directly from businesses who rely on OEM Group® for equipment and tailored solutions.
